RollStar 2-Box Rolloff Trailer

Easier, Simpler and Safer.
Operators of roll-offs are turning to the completely redesigned Clement RollStar 2-Box as the answer to the distance between plant sites and the hundreds-of-miles-away destinations.


Capacity: Minimum container size at center – 20 ft. w/50,000# load, smaller sizes must be moved to the front.

Suspension: 50,000# single point, 3-leaf
Axles: (2) 102-inch, 25,000 lb, 5-inch round, common
inner/outer bearings
Hubs: 10 Hole pilot hub
Tires: 11.00×24.5-inch radial
Brakes: Air 16-1/2×7-inch cast drum
ABS: 2S 1M
Paint: One color urethane enamel over primed surface
Lights: Sealed beam rubber grommet
Wiring: Sealed Harness, 7-wire ATA
Mud Flaps: Rear only
King Pin Plate: 3/4-inch HT50 (Rocking)
Back Up Alarm: Yes
King Pin Plate:
Tilt Frame: 15-inch HT60 composite
Draft Arms: 4x4x1/4-inch Ht50

Once loaded via the winch and tilt frame, boxes are moved forward and rearward by a hydraulic motor and chain conveyor system.

A rear-mounted tilt frame with twin 6 x 79-inch hydraulic-lift cylinders loads standard boxes up to 24-feet in length.


There are no reviews yet.

Be the first to review “RollStar 2-Box Rolloff Trailer”